The machine is normally started by a superior control system. 

The wire is pre fed into the wire guide system. 

When start signal for binding is received the binding head moves down against the package. 

The end of the wire is clamped. 

Wire feeding wheel reverses and stretching procedure follows including a flap sequence to achieve a firm and tight binding around the package. 

Clamping of second wire part i.e. both wires passing through twisting head clamped. 

Twisting head rotation starts, and after a short moment, second clamping tool is deactivated. The wire is cut shortly after the twisting head starts to rotate the rotation movement. 

Twisting the wire ends a number of turns completes knot. 

The machine then returns to start position and a signal is sent to the superior control system indicating that the package is ready to be moved. 

The sequence is similar for double binding but the binding wire passes two turns in the guide system before the end is being clamped. 

The double binding can either be two tight turns or one tight and one loose turn. 

major advantages 

- High operational accessibility 
- Low maintenance requirements 
- Rigid design 
- Entirely hydraulic driven 
- Designed for harsh environment 
- Well proven design 
- Improved twisting-head for higher quality of knot

The machines are normally delivered as self-contained units, Including electrical control system and hydraulic unit. Completely tested in workshop. 

Typical areas of application 
Binding of master bundles and package 

Binding wire 
Wire rod of diameter 6.0 - 8.0 mm 

Wire guide tracks 

Single turn 
 800 mm 
1000 mm 
1300 mm 
1800 mm 

Double turn 
 800 D 
1000 D 
1300 D

Max. package size 
 

Wire guie	round	square
800 1000 1300 1800	550 mm  650 mm  850 mm 1150 mm	450 mm  600 mm  750 mm 1050 mm
800 D 1000 D 1300 D	400 mm 600 mm 800 mm	400 mm 550 mm 750 mm

Binding time 

5-16.5 sec, depending on application 

Electrical equipment 

Electric motor   11 kW 
Internal voltage 24 VDC 
Control system   PLC 

Weight 

Approx. 3100 - 3400 kr, depending on application 

Options 

- Flaps for square package 
- Openable wire guides 
- Carriage for movement to different binding positions