Coil Compactor

Home > Facilities > SUND BIRSTA > Products > Coil Compactor 무역상식

Machine Specification

Press Carriage with base frame, guided in two rail sections, supporting four Feeding units KNC, four Binding units KNA and Press plate.

Press Plate Carriage resting on steel rollers and guide in rails, supporting the movable wire guide track system.

Lifting Table

Wire Binding Arrangement mainly consisting of support beam with pulley wheels, four wire pallets for the biding wire and service platform.

Hydraulic Equipment mainly consisting of Hydraulic tank, Hydraulic pumps, Electric motors, Electrical oil heater, Circulation motor and Filter.

Electrical Equipment for automatic and manual control of the coil compactor consisting of MCC, PLC and control panels.

Coil Compactor type PCH-4KNA/4600

PCH-compactor in a SUNDCO-H hook system application . . . . PCH compactor equipped with exchangeable wire binding heads and press plate (->)

Technical Data

Compactor sizes: 2800, 3800, 4600, 5000 or 5500 mm

Bing wire: 6.3 - 7.3 mm

Press force: Adujustible in six steps up to max 400 kN

Power consumption: 140 kW

Water consumption: 75 l/min

Working hydraulic pressure: 13 Mpa (130 bar)

Required air pressure: 0.5 Mpa (5 bar)

Options: Turning Rollers for turning the coils 45^o when applying eight-bindings

Changeable The binding units can be changed between wire binding units (as shown to the left) and strap binding units (shown to the right). The changing operation is very simple.